10分赛车官网

What is the reason for the shell fracture of horizontal vibration motor?

Time: 2020-08-14 17:42:44 source: Internet Click: 494 times
Many customers don't understand why horizontal vibration motors break. However, in the process of use, horizontal vibration motor will appear the phenomenon of motor shell fracture. Today I would like to talk about the reasons and methods of horizontal vibration motor casing fracture.
 Horizontal vibration motor
Horizontal vibration motor is different from other motors, which produces destructive vibration. Some customers will not fix the bottom corner screw tightly when installing. During the operation of horizontal vibration motor, the fixed electric screw will be vibrated off, and the vibration may be loose, and the shell of horizontal vibration motor will be broken. The customer must fix the screws of the motor firmly during installation. The newly installed motor should be tightened three times a day, which can prevent the horizontal vibration motor screw from loosening and causing the shell to crack.
 Horizontal vibration motor
Another is the horizontal vibration motor shell fracture, one is due to the shell iron casting itself problems, customers can not solve, need to find the manufacturer to solve.

Another reason for the shell fracture of horizontal vibration motor is whether to check whether the direct contact between the bottom surface of the foundation and the installation steel plate is flat during installation, and it is required to be smooth contact. Both contact surfaces are processing surfaces, at least one of which is a processing surface. The bottom surface of horizontal vibration motor must also be checked to ensure that the flat surface has no impurities.
 Horizontal vibration motor
Secondly, in the process of use, it is necessary to re tighten the bolts every other day at the beginning. After two or three times, it can be extended to once every other week, and then it can be done after two or three times. If it is a large horizontal vibration motor, it should be tightened again between one and two months. It is mainly to prevent the bolt from being loosened by the vibration force of horizontal vibration motor during operation.
In the process of using horizontal vibration motor, strictly following the above precautions, the phenomenon of foundation fracture of horizontal vibration motor can be basically eliminated, except for unqualified casting parts.

After reading these reasons, I hope to help you. If you are interested, you can contact us. Xiaobian is at your service.