10分赛车官网

Do you know the installation and debugging of explosion-proof vibration motor?

Time: August 31, 2020 15:56:45 source: network Click: 306 times
What is the installation and adjustment of explosion-proof vibration motor? You know what? The following is your answer:
Overview of explosion proof vibration motor:

Explosion proof vibration motor is widely used in vibration machinery industry linear vibration screen, ultrasonic vibration screen, three-dimensional vibration screen, vibration feeder and other vibration equipment, so what is the installation and adjustment sequence of explosion-proof vibration motor?


Let's share our experience with you
Installation and debugging of explosion-proof motor:
1、 The explosion-proof vibration motor shall be firmly installed on the vibration machine without loosening. After the initial use, the anchor bolts should be reinforced again.
2、 The rubber sheathed flexible cable (the outer diameter of rubber sleeve is 15mm) for explosion-proof vibration motor is connected with the power supply. The wiring steps are as follows:
1. Wipe the outside of the junction box and strip the insulation of the cable part.
2. Remove the outlet gland, cable guide sleeve, sealing ring and terminal box cover.
3. Cover the cable with outlet gland, cable guide sleeve and sealing ring, and then connect the power core wire and grounding core wire of the cable to the terminal post and grounding screw respectively, and pay attention to the exposed part of the wire not exposed outside the bow washer.
4. Install the sealing ring, cable guide sleeve, outlet pressure plate and junction box cover.

5. The explosion-proof surface shall be protected from damage during disassembly and assembly. 204-1 antirust oil shall be applied during assembly, and the explosion-proof surface shall be closely fitted after installation.


3、 The cable shall have a natural suspension between the junction box and the non vibration fixing clip, that is, the cable length between the junction box and the non vibration fixing card shall be 400-700mm longer than the line distance.
Hope my answer can help you, want to know more knowledge, remember to pay attention to, if you have different opinions, welcome to share, learn together, thank you!