10分赛车官网

Ybzq vibration motor

Time: November 24, 2018 11:25:23 source: Internet Click: 1268 times
 Ybzq vibration motor
Related introduction

The high-speed centrifugal vibration of the motor can be generated by the eccentric vibration of the rotor block. The vibration frequency range of the vibration motor is large, and the mechanical noise can be reduced only if the exciting force and power are matched properly.

Features of ybzq vibration motor:

1. Easy maintenance.

2. Strong body strength and low noise.

3. The exciting force and the output match properly, and the exciting force is large.

4. Vibration frequency and amplitude can be selected according to different purposes.

5. Complete specifications, which can meet the working needs of all kinds of vibration machinery.

6. The direction of exciting force can be changed according to the installation mode of vibration motor.

7. The exciting force can be adjusted steplessly by adjusting the included angle of eccentric block.

8. Fully enclosed structure, it can work under any dust condition without explosion-proof requirements.

 Ybzq vibration motor

Operation and maintenance of ybzq vibration motor:

adjustment

There is a fixed eccentric block and an adjustable eccentric block at each end of the output shaft of the vibration motor. The exciting force can be changed by adjusting the angle between the adjustable eccentric block and the fixed eccentric block. When leaving the factory, the angle between the adjustable eccentric block and the fixed eccentric block is 0 degrees. At this time, the exciting force is the rated exciting force F of the vibration motor. The exciting force at different angles is as follows:

Special attention should be paid to the fact that the adjustable eccentric blocks on the shaft at both ends of the vibration motor should be adjusted to the same angle in the same direction when adjusting the exciting force.

 Ybzq vibration motor

Adjustment steps of excitation force of ybzq vibration motor:

1. Remove the protective cover.

2. Loosen the fastening bolt of the outer eccentric block.

3. The eccentric blocks on both sides should rotate in the same direction, so that the marking line on the shaft is aligned with the exciting force indication line on the eccentric block to the required exciting force value, and check whether the two ends are at the same angle.

Excitation regulation

The exciting force of the vibration motor is adjusted to 80 when it is delivered from the factory, and to 0 when it is required to be transported by sea (export).